Compiler compatible 5.66 Mb/mm2 8T 1R1W register file in 14 nm FinFET technology

1-read/1-write (1R1W) register file (RF) is a popular memory configuration in modern feature rich SoCs requiring significant amount of embedded memory. A memory compiler is constructed using the 8T RF bitcell spanning a range of instances from 32 b to 72 Kb. An 8T low-leakage bitcell of 0.106 μm² is used in a 14 nm FinFET technology with a 70 nm contacted gate pitch for high-density (HD) two-port (TP) RF memory compiler which achieves 5.66 Mb/mm² array density for a 72 Kb array which is the highest reported density in 14 nm FinFET technology. The density improvement is achieved by using techniques such as leaf-cell optimization (eliminating transistors), better architectural planning, top level connectivity through leaf-cell abutment and minimizing the number of unique leaf-cells. These techniques are fully compatible with memory compiler usage over the required span. Leakage power is minimized by using power-switches without degrading the density mentioned above. Self-induced supply voltage collapse technique is applied for write and a four stack static keeper is used for read Vmin improvement. Fabricated test chips using 14 nm process have demonstrated 2.33 GHz performance at 1.1 V/25 °C operation. Overall V_min of 550 mV is achieved with this design at 25 °C. The inbuilt power-switch improves leakage power by 12x in simulation. Approximately 8% die area of a leading 14 nm SoC in commercialization is occupied by these compiled RF instances.     

High birefringence photonic bandgap fiber with elliptical air holes

In this paper, we proposed a high birefringence photonic bandgap fiber (PBGF) with elliptical air holes in cladding and circular air hole in core. The forbidden gaps of the honeycomb structure are calculated when the circular air holes are deformed to the elliptical shape. And the birefringence of the PBGFs is investigated by using a full-vector finite element method (FEM) and the numerical results are presented.     

Investigation of performance variations due to the amplitude of group-delay ripple in chirped fiber Bragg gratings

We measure the system impacts due to the amplitude of group-delay (GD) ripple in single and cascaded chirped fiber Bragg gratings (CFBGs). Signals with smaller pulse width result in smaller performance variation at the same data rate. A 65-ps peak-to-peak GD ripple induces 0.9, 1.7, and 2.7 dB maximum penalties for 10, 20, and 40-Gb/s, respectively. We also find that cascading gratings with random ripple causes much less degradation than cascading gratings with the same ripple profile.     

Fabrication and frequency response of a complex ultrasonic transducer for multilayer evaluation

To characterize the thickness of a corrosive fluid system's coated facilities, such as pipes, tubes, tanks, and structural members, a complex ultrasonic transducer capable of measuring multilayered parts was fabricated and the time and frequency responses were evaluated. The target transducer was constructed with two active dual elements made from tape-cast PbNb₂O₆ sheets and an additional thin-film active element made from sol–gel spin-coated Pb(Zr_0.52Ti_0.48)O₃ films. After adjusting the properties of each active element, a complex transducer was assembled after matching the impedance of each element and considering the minimal interference between the active layers. The impulse response of the assembled complex transducer shows excellent characteristics. Moreover, the assembled transducer's capability of accurately measuring the thickness assures that it can be directly applied to related industries.     

Sparse field level set method for non-convex Hamiltonians in 3D plasma etching profile simulations

Level set method [S. Osher, J. Sethian, J. Comput. Phys. 79 (1988) 12] is a highly robust and accurate computational technique for tracking moving interfaces in various application domains. It originates from the idea to view the moving front as a particular level set of a higher dimensional function, so the topological merging and breaking, sharp gradients and cusps can form naturally, and the effects of curvature can be easily incorporated. The resulting equations, describing interface surface evolution, are of Hamilton-Jacobi type and they are solved using techniques developed for hyperbolic equations. In this paper we describe an extension of the sparse field method for solving level set equations in the case of non-convex Hamiltonians, which are common in the simulations of the profile surface evolution during plasma etching and deposition processes. Sparse field method itself, developed by Whitaker [R. Whitaker, Internat. J. Comput. Vision 29 (3) (1998) 203] and broadly used in image processing community, is an alternative to the usual combination of narrow band and fast marching procedures for the computationally effective solving of level set equations. The developed procedure is applied to the simulations of 3D feature profile surface evolution during plasma etching process, that include the effects of ion enhanced chemical etching and physical sputtering, which are the primary causes of the Hamiltonian non-convexity.     

Simulation of humidity control and greenhouse temperature tracking in a growth chamber using a passive air conditioning unit

In this paper, we define a dynamic discrete model of a passive air conditioning unit, without the more typical compression or absorption-refrigeration cycle. The unit is composed of heat exchangers, a positioning system and humid corrugated pads. The aim of the study was to follow the temperature in a greenhouse and to replicate it with a desired and stable relative humidity in a ventilated growth chamber. A control law, based on a quadratic criterion and dynamic programming, taking output error and energy consumption minimisation into account, was used to control the behaviour of the unit in spite of air intake disturbances. The results of the simulation indicate that the air conditioning unit can produce a variable climate in the growth chamber, with a wide range of relative humidity setpoints.     

Investigation of the power dissipation during IGBT turn-off using a new physics-based IGBT compact model

New compact models of the IGBTs (both non-punch through IGBT (NPTIGBT) and punch-through IGBT (PTIGBT)) are presented in this paper. The models are implemented in the SABER circuit simulator and used for a study of IGBT anode current and voltage characteristics during a device turn-off (clamped inductive load circuit with gate controlled turn-off), since these parts of the transient characteristics essentially predict the power dissipation (V×I) inside the device. It is shown that PTIGBTs are faster than NPTIGBTs, this becoming more apparent at higher clamp voltages.     

Goal-directed imitation for robots: A bio-inspired approach to action understanding and skill learning

In this paper we present a robot control architecture for learning by imitation which takes inspiration from recent discoveries in action observation/execution experiments with humans and other primates. The architecture implements two basic processing principles: (1) imitation is primarily directed toward reproducing the outcome of an observed action sequence rather than reproducing the exact action means, and (2) the required capacity to understand the motor intention of another agent is based on motor simulation. The control architecture is validated in a robot system imitating in a goal-directed manner a grasping and placing sequence displayed by a human model. During imitation, skill transfer occurs by learning and representing appropriate goal-directed sequences of motor primitives. The robustness of the goal-directed organization of the controller is tested in the presence of incomplete visual information and changes in environmental constraints.     

Evaluation of the parameters of a magnetic hysteresis model

This paper presents a method based on use of a measurement system in order to significantly reduce the time taken and to improve the accuracy in evaluating parameters of the Jiles–Atherton's model of magnetic hysteresis. The steps of the proposed method: (a) data acquisition from the experimental hysteresis loop of the magnetic material under test, (b) evaluation of the model's parameters. In order to highlight the method's effectiveness, the results of experimental tests are also given.     

Thermal stability of reinforced Nb3Sn composite superconductor under cryocooled conditions

Several types of reinforced Nb₃Sn wires have been developed to prevent reduction of superconducting properties by applying a strong electromagnetic force. To fabricate a cryocooled magnet using those reinforced wires, we experimentally measured the minimum quench energy (MQE) under cryocooled conditions of some reinforced Nb₃Sn wires. As a result, it became clear that thermal stability expressed as MQE was controlled by the temperature margin between the temperature of the operating condition and the transition temperature from superconductivity to normal. Using the FEM analysis, it was realized that the cause of the decline in thermal stability for the reinforced wires was the low thermal conductivity of the reinforced materials.